利用OH发射谱进行的高温低浓度甲烷着火研究

采用激波管进行低浓度甲烷和空气混合气的着火实验,通过测量压力和OH发射光谱,得到不同工况下的着火延迟,并与甲烷的详细反应机理计算结果作比较。结果表明:不同浓度下甲烷着火延迟的对数与温度倒数呈线性关系,着火延迟随甲烷浓度的降低而减少;贫燃条件下,采用详细动力学机理计算的表观活化能与实验数据拟合较好。     

点火瞬态过程对复合固体推进剂力学响应特性的影响

根据一个有效的非线性粘弹模型,导出复合固体推进剂微分形式本构方程和应变速率关系式。分析表明点火瞬态过程中压强与推进剂应变、升压速率与推进剂应变速率之间呈线性关系,线性系数均为推进剂初始模量。     

火炮装药温度分布的数值模拟

针对火炮弹药的特点,建立了弹药的二维轴对称模型,并在圆柱坐标系下,用控制容积积分法导出一组差分离散格式。采用收敛速度快的块迭代法解代数方程组。实验数据表明数值计算的结果和实测值基本一致,经进一步研究可以用于火炮装药的温度测量。     

A melt-cast Duan-Zhang-Kim mesoscopic reaction rate model and experiment for shock initiation of melt-cast explosives

A melt-cast Duan-Zhang-Kim (DZK) mesoscopic reaction rate model is developed for the shock initiation of melt-cast explosives based on the pore collapse hot-spot ignition mechanism. A series of shock initiation experiments was performed for the Comp B melt-cast explosive to estimate effects of the loading pressure and the particle size of granular explosive component, and the mesoscopic model is validated against the experimental data. Further numerical simulations indicate that the initial density and formula proportion greatly affect the hot-spot ignition of melt-cast explosives.     

Experimental investigation on enhanced damage to fuel tanks by reactive projectiles impact

Enhanced damage to the full-filled fuel tank,impacted by the cold pressed and sintered PTFE/AL/W reactive material projectile(RMP)with a density of 7.8 g/cm3,is investigated experimentally and theoretically.The fuel tank is a rectangular structure,welded by six pieces of 2024 aluminum plate with a thickness of 6 mm,and filled with RP-3 aviation kerosene.Experimental results show that the kerosene is ignited by the RMP impact at a velocity above 1062 m/s,and a novel interior ignition phenomenon which is closely related to the rupture effect of the fuel tank is observed.However,the traditional steel projectile with the same mass and dimension requires a velocity up to 1649 m/s to ignite the kerosene.Based on the experimental results,the radial pressure field is considered to be the main reason for the shear failure of weld.For mechanism considerations,the chemical energy released by the RMP enhances the hydrodynamic ram(HRAM)effect and provides additional ignition sources inside the fuel tank,thereby enhancing both rupture and ignition effects.Moreover,to further understand the enhanced ignition effect of RMP,the reactive debris temperature inside the kerosene is analyzed theoretically.The initiated reactive debris with high temperature provides effective interior ignition sources to ignite the kerosene,resulting in the enhanced ignition of the kerosene.     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

一个输入依赖于系统状态的排队模型的瞬时队长分布

探讨了一个有如下特征的排队系统:该系统的第m个到达间隔αm-αm-1(m≥1)的分布依赖系统在时刻αm-1拥有的顾客数目。应用补充变量方法,这个系统的瞬时队长分布的积分表示被得到。在各到达间隔分布和诸服务时间分布均具有密度函数的条件下,这个积分表示的被积项能够递归地求取。     

基于锥形量热法的油池火相似性及点火特性模拟实验

针对油料池火灾相似性及点火特性研究需要,构建了一种基于耗氧原理的油池火锥形量热法模拟实验系统,引入火灾尺度相似性概念,研究了实验室尺度油池火与真实尺度油池火的相似性关系,探讨了实验室尺度油池火预测真实尺度油池火的可行性,基于实验室尺度锥形量热法研究了油池火点火特性,得到了辐射强度、辐射距离对油料点燃时间的影响规律以及点燃时间与锥照射强度之间的拟合公式。     

建筑太阳能光电热一体化系统的瞬态性能模拟

利用TRNSYS软件对重庆夏季建筑屋顶太阳能光电热一体化系统进行瞬态模拟分析计算,得到系统瞬时发电量与一段时间内累计发电量,光电热模块瞬时进出水温度与太阳能平板集热器瞬时进出水温度,系统一段时间内光电热模块累计有效得热量与一段时间内太阳能平板集热器累计有效得热量,系统的光电转换效率、光热转换效率以及太阳能综合利用效率。结果表明,建筑屋顶太阳能光电热一体化系统是重庆地区建筑太阳能光电热一体化系统适宜的型式。     

温升热源条件油气热着火关键因素探究

通过对影响油气受热着火的关键因素进行研究,为发展主动防护技术提供理论依据。基于系统的实验和分析,探究了快速氧化现象、热源加热速度、热源面积与爆燃空间比例对热着火发生时临界浓度、着火概率和着火延迟期的影响,提出了温升热源条件受限空间能否发生热着火的综合判据。该判据认为：如果油气体积分数低于2.4％,受限空间体积与热源面积比值小于0．64m,那么即使温度达到873K,湿度降低到18％～21％,着火也不会发生。